网络用户提要求找人帮忙做的网站,品牌建设的内容有哪些,凡客官方网站,泰安网红餐厅1.选择ESP32开发板
2.寻找串口号#xff0c;win10自动安装驱动 手动安装驱动参考#xff1a;
百度网盘 请输入提取码百度网盘为您提供文件的网络备份、同步和分享服务。空间大、速度快、安全稳固#xff0c;支持教育网加速#xff0c;支持手机端。注册使用百度网盘即可…
1.选择ESP32开发板
2.寻找串口号win10自动安装驱动 手动安装驱动参考
百度网盘 请输入提取码百度网盘为您提供文件的网络备份、同步和分享服务。空间大、速度快、安全稳固支持教育网加速支持手机端。注册使用百度网盘即可享受免费存储空间https://pan.baidu.com/s/16LBFQ2mfr9ZjyQxi3EW73w?pwdc7gb
提取码c7gb 3.arduinoIDE选择工具-》端口 4.拷贝代码到编辑窗口
板载LED D2表示2号引脚
定义#define led 2
/*BlinkTurns an LED on for one second, then off for one second, repeatedly.Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZEROit is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set tothe correct LED pin independent of which board is used.If you want to know what pin the on-board LED is connected to on your Arduinomodel, check the Technical Specs of your board at:https://www.arduino.cc/en/Main/Productsmodified 8 May 2014by Scott Fitzgeraldmodified 2 Sep 2016by Arturo Guadalupimodified 8 Sep 2016by Colby NewmanThis example code is in the public domain.https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
*/// the setup function runs once when you press reset or power the board
//esp32 dev module#define led 2
void setup() {// initialize digital pin LED_BUILTIN as an output.Serial.begin(115200);pinMode(led, OUTPUT);
}// the loop function runs over and over again forever
void loop() {digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)delay(1000); Serial.println(led is high); // wait for a seconddigitalWrite(led, LOW); // turn the LED off by making the voltage LOWdelay(1000); Serial.println(led is low); // wait for a second
}
5.点击验证表示编译 6.编译完成后点击上传 7.上传成功 8.LED开始闪烁
