网站快照历史,网站建设的核心是什么,建设银行积分兑换商城网站,wordpress远程安装教程一、lvgl测试环境 对拿到的M1S_DOCK开发板进行开发板测试#xff0c;博流的官方SDK是支持M0和D0两个内核都进行测试的#xff1b;但是目前只实现了M0的LVGLBenchmark#xff0c;测试D0内核中发现很多莫名其妙的问题。一会详细记录。 使用的是开发板自带的SPI显示屏#xff…一、lvgl测试环境 对拿到的M1S_DOCK开发板进行开发板测试博流的官方SDK是支持M0和D0两个内核都进行测试的但是目前只实现了M0的LVGLBenchmark测试D0内核中发现很多莫名其妙的问题。一会详细记录。 使用的是开发板自带的SPI显示屏280*240分辨率。
二、M0内核lvgl测试 使用官方默认的SDK进行编译会报错缓存不够按照下列方式修改SDK中的.ld内存分布文件
/bouffalo_sdk/bsp/board/bl808dk/bl808_flash_m0.ld文件。主要目的就是修改ram_memory的大小把ram_wifi的大小暂时调整为0因为目前官方SDK无法启用无线功能。如果测试过程中卡住就是ram_memory太小了缓存不够使用了调大即可。
/****************************************************************************************
* file flash.ld
*
* brief This file is the link script file (gnuarm or armgcc).
*
* Copyright (C) BouffaloLab 2021
*
****************************************************************************************
*//* configure the CPU type */
OUTPUT_ARCH( riscv )/* configure the entry point */
ENTRY(__start)StackSize 0x0400; /* 1KB */
HeapMinSize 0x1000; /* 4KB */
psram_min_size 0x1000;__EM_SIZE DEFINED(btble_controller_init) ? 32K : 0K;MEMORY
{fw_header_memory (rx) : ORIGIN 0x58000000 - 0x1000, LENGTH 4Kxip_memory (rx) : ORIGIN 0x58000000, LENGTH 32Mram_psram (wxa) : ORIGIN 0x50000000, LENGTH 64Mitcm_memory (rx) : ORIGIN 0x62020000, LENGTH 32Kdtcm_memory (rx) : ORIGIN 0x62028000, LENGTH 16Knocache_ram_memory (!rx) : ORIGIN 0x2202C000, LENGTH 16Kram_memory (!rx) : ORIGIN 0x62038000, LENGTH 128Kram_wifi (wxa) : ORIGIN 0x22058000, LENGTH 0Kxram_memory (!rx) : ORIGIN 0x40000000, LENGTH 16K
}SECTIONS
{.fw_header :{KEEP(*(.fw_header))} fw_header_memory.init :{KEEP (*(SORT_NONE(.init)))KEEP (*(SORT_NONE(.vector)))} xip_memory.text :{. ALIGN(4);__text_code_start__ .;*(.text)*(.text.*)/* section information for shell */. ALIGN(4);__fsymtab_start .;KEEP(*(FSymTab))__fsymtab_end .;. ALIGN(4);__vsymtab_start .;KEEP(*(VSymTab))__vsymtab_end .;/* section information for usb usbh_class_info */. ALIGN(4);__usbh_class_info_start__ .;KEEP(*(.usbh_class_info)). ALIGN(4);__usbh_class_info_end__ .;/*put .rodata**/*(EXCLUDE_FILE( *bl808_glb*.o* \*bl808_glb_gpio*.o* \*bl808_pds*.o* \*bl808_aon*.o* \*bl808_hbn*.o* \*bl808_l1c*.o* \*bl808_common*.o* \*bl808_clock*.o* \*bl808_ef_ctrl*.o* \*bl808_sf_cfg*.o* \*bl808_sf_ctrl*.o* \*bl808_sflash*.o* \*bl808_xip_sflash*.o* \*bl808_romapi_patch*.o* ) .rodata*)*(.srodata)*(.srodata.*). ALIGN(4);__text_code_end__ .;} xip_memory. ALIGN(4);__itcm_load_addr .;.itcm_region : AT (__itcm_load_addr){. ALIGN(4);__tcm_code_start__ .;*(.tcm_code.*)*(.tcm_const.*)*(.sclock_rlt_code.*)*(.sclock_rlt_const.*)*bl808_glb*.o*(.rodata*)*bl808_glb_gpio*.o*(.rodata*)*bl808_pds*.o*(.rodata*)*bl808_aon*.o*(.rodata*)*bl808_hbn*.o*(.rodata*)*bl808_l1c*.o*(.rodata*)*bl808_common*.o*(.rodata*)*bl808_clock*.o*(.rodata*)*bl808_ef_ctrl*.o*(.rodata*)*bl808_sf_cfg*.o*(.rodata*)*bl808_sf_ctrl*.o*(.rodata*)*bl808_sflash*.o*(.rodata*)*bl808_xip_sflash*.o*(.rodata*)*bl808_romapi_patch*.o*(.rodata*). ALIGN(4);__tcm_code_end__ .;} itcm_memory__dtcm_load_addr __itcm_load_addr SIZEOF(.itcm_region);.dtcm_region : AT (__dtcm_load_addr){. ALIGN(4);__tcm_data_start__ .;*(.tcm_data)/* *finger_print.o(.data*) */. ALIGN(4);__tcm_data_end__ .;} dtcm_memory/*************************************************************************//* .stack_dummy section doesnt contains any symbols. It is only* used for linker to calculate size of stack sections, and assign* values to stack symbols later */.stack_dummy (NOLOAD):{. ALIGN(0x4);. . StackSize;. ALIGN(0x4);} dtcm_memory/* Set stack top to end of RAM, and stack limit move down by* size of stack_dummy section */__StackTop ORIGIN(dtcm_memory) LENGTH(dtcm_memory);PROVIDE( __freertos_irq_stack_top __StackTop);__StackLimit __StackTop - SIZEOF(.stack_dummy);/* Check if data heap stack exceeds RAM limit */ASSERT(__StackLimit __tcm_data_end__, region RAM overflowed with stack)/*************************************************************************/__nocache_ram_load_addr __dtcm_load_addr SIZEOF(.dtcm_region);.nocache_ram_region : AT (__nocache_ram_load_addr){. ALIGN(4);__nocache_ram_data_start__ .;*(.nocache_ram). ALIGN(4);__nocache_ram_data_end__ .;} nocache_ram_memory__ram_load_addr __nocache_ram_load_addr SIZEOF(.nocache_ram_region);/* Data section */RAM_DATA : AT (__ram_load_addr){. ALIGN(4);__ram_data_start__ .;PROVIDE( __global_pointer$ . 0x800 );*(.data)*(.data.*)*(.sdata)*(.sdata.*)*(.sdata2)*(.sdata2.*). ALIGN(4);__bflog_tags_start__ .;*(.bflog_tags_array). ALIGN(4);__bflog_tags_end__ .;__ram_data_end__ .;} ram_memory__psram_load_addr (__ram_load_addr SIZEOF (RAM_DATA));.psram_data_region : AT (__psram_load_addr){. ALIGN(4);__psram_data_start__ .;KEEP(*(.psram_data*)). ALIGN(4);__psram_data_end__ .;} ram_psram__etext_final (__psram_load_addr SIZEOF (.psram_data_region));ASSERT(__etext_final ORIGIN(xip_memory) LENGTH(xip_memory), code memory overflow).bss (NOLOAD) :{. ALIGN(4);__bss_start__ .;*(.bss*)*(.sbss*)*(COMMON). ALIGN(4);__bss_end__ .;} ram_memory.noinit_data (NOLOAD) :{. ALIGN(4);__noinit_data_start__ .;*(.noinit_data*). ALIGN(4);__noinit_data_end__ .;} ram_memory.nocache_noinit_ram_region (NOLOAD) :{. ALIGN(4);__nocache_noinit_ram_data_start__ .;*(.nocache_noinit_ram)*(.noncacheable). ALIGN(4);__nocache_noinit_ram_data_end__ .;} nocache_ram_memory.heap (NOLOAD):{. ALIGN(4);__HeapBase .;/*__end__ .;*//*end __end__;*/KEEP(*(.heap*)). ALIGN(4);__HeapLimit .;} ram_memory__HeapLimit ORIGIN(ram_memory) LENGTH(ram_memory);ASSERT(__HeapLimit - __HeapBase HeapMinSize, heap region overflow).psram_noinit_data (NOLOAD):{. ALIGN(4);__psram_noinit_data_start__ .;KEEP(*(.psram_noinit*)). ALIGN(4);__psram_noinit_data_end__ .;} ram_psram.psram_heap (NOLOAD):{. ALIGN(4);__psram_heap_base .;KEEP(*(.psram_heap*)). ALIGN(4);__psram_heap_end .;} ram_psram__psram_limit ORIGIN(ram_psram) LENGTH(ram_psram);ASSERT(__psram_limit - __psram_heap_base psram_min_size, psram heap region overflow).wifibss (NOLOAD) :{PROVIDE( __wifi_bss_start ADDR(.wifibss) );PROVIDE( __wifi_bss_end ADDR(.wifibss) SIZEOF(.wifibss) );*ipc_shared.o(COMMON)*sdu_shared.o(COMMON)*hal_desc.o(COMMON)*txl_buffer_shared.o(COMMON)*txl_frame_shared.o(COMMON)*scan_shared.o(COMMON)*scanu_shared.o(COMMON)*mfp_bip.o(COMMON)*me_mic.o(COMMON)*bl_sta_mgmt_others.o(COMMON)*bl_pmk_mgmt.o(COMMON)*bl_pmk_mgmt_internal.o(COMMON)*libwifi_drv.a:bl_utils.o(COMMON)*libwifi_drv.a:bl_utils.o(.bss*)*(.wifi_ram*). ALIGN(16);} ram_wifiPROVIDE(__LD_CONFIG_EM_SEL __EM_SIZE);
} 修改完成后最好把LP内核的内存分布文件也修改一下。这里引申出一个问题就是内存的分布肯定是LP和M0内核共享OCRAMWRAM但是不知道两个内核的itcm_memory 和dtcm_memory的大小是不是要按照规格书改成32K16K官方默认的大小是20K4K搞不懂是什么用意。而且两个内核的部分区域在官方SDK中竟然重叠了好奇怪。对于初学者来说实在是头大官方也没有任何说明。 这里直接贴图一个成绩。
____ __ __ _ _ _| _ \ / _|/ _| | | | | | || |_) | ___ _ _| |_| |_ __ _| | ___ | | __ _| |__| _ / _ \| | | | _| _/ _ | |/ _ \| |/ _ | _ \| |_) | (_) | |_| | | | || (_| | | (_) | | (_| | |_) ||____/ \___/ \__,_|_| |_| \__,_|_|\___/|_|\__,_|_.__/Build:10:29:32,Oct 4 2023
Copyright (c) 2022 Bouffalolab teamflash cfg
flash size 0x01000000
jedec id 0xEF4018
mid 0xEF
iomode 0x04
clk delay 0x01
clk invert 0x01
read reg cmd0 0x05
read reg cmd1 0x35
write reg cmd0 0x01
write reg cmd1 0x31
qe write len 0x01
cread support 0x00
cread code 0xFF
burst wrap cmd 0x77dynamic memory init success,heap size 86 Kbyte
sig1:ffff32ff
sig2:0000ffff
lvgl case
lvgl success
[LVGL]
LVGL v8.3.7 Benchmark (in csv format)
[LVGL] Weighted FPS: 67
[LVGL] Opa. speed: 97%
[LVGL] Text small,19
[LVGL] Text small opa,[LVGL] 19
[LVGL] Text medium,19
[LVGL] Text medium opa,[LVGL] 19
[LVGL] Text large,19
[LVGL] Text large opa,[LVGL] 19
[LVGL] Text large compressed,16
[LVGL] Substr. shadow,19
[LVGL] Substr. text,15
[LVGL] Rectangle,60
[LVGL] Rectangle opa,[LVGL] 57
[LVGL] Rectangle rounded,53
[LVGL] Rectangle rounded opa,[LVGL] 52
[LVGL] Circle,49
[LVGL] Circle opa,[LVGL] 48
[LVGL] Border,59
[LVGL] Border opa,[LVGL] 59
[LVGL] Border rounded,52
[LVGL] Border rounded opa,[LVGL] 52
[LVGL] Circle border,46
[LVGL] Circle border opa,[LVGL] 46
[LVGL] Border top,54
[LVGL] Border top opa,[LVGL] 54
[LVGL] Border left,54
[LVGL] Border left opa,[LVGL] 54
[LVGL] Border top left,53
[LVGL] Border top left opa,[LVGL] 52
[LVGL] Border left right,53
[LVGL] Border left right opa,[LVGL] 52
[LVGL] Border top bottom,52
[LVGL] Border top bottom opa,[LVGL] 53
[LVGL] Shadow small,40
[LVGL] Shadow small opa,[LVGL] 39
[LVGL] Shadow small offset,35
[LVGL] Shadow small offset opa,[LVGL] 35
[LVGL] Shadow large,26
[LVGL] Shadow large opa,[LVGL] 25
[LVGL] Shadow large offset,27
[LVGL] Shadow large offset opa,[LVGL] 28
[LVGL] Image RGB,170
[LVGL] Image RGB opa,[LVGL] 180
[LVGL] Image ARGB,161
[LVGL] Image ARGB opa,[LVGL] 154
[LVGL] Image chorma keyed,165
[LVGL] Image chorma keyed opa,[LVGL] 164
[LVGL] Image indexed,150
[LVGL] Image indexed opa,[LVGL] 151
[LVGL] Image alpha only,158
[LVGL] Image alpha only opa,[LVGL] 150
[LVGL] Image RGB recolor,156
[LVGL] Image RGB recolor opa,[LVGL] 150
[LVGL] Image ARGB recolor,142
[LVGL] Image ARGB recolor opa,[LVGL] 141
[LVGL] Image chorma keyed recolor,151
[LVGL] Image chorma keyed recolor opa,[LVGL] 142
[LVGL] Image indexed recolor,144
[LVGL] Image indexed recolor opa,[LVGL] 143
[LVGL] Image RGB rotate,118
[LVGL] Image RGB rotate opa,[LVGL] 118
[LVGL] Image RGB rotate anti aliased,100
[LVGL] Image RGB rotate anti aliased opa,[LVGL] 96
[LVGL] Image ARGB rotate,114
[LVGL] Image ARGB rotate opa,[LVGL] 112
[LVGL] Image ARGB rotate anti aliased,86
[LVGL] Image ARGB rotate anti aliased opa,[LVGL] 86
[LVGL] Image RGB zoom,125
[LVGL] Image RGB zoom opa,[LVGL] 121
[LVGL] Image RGB zoom anti aliased,108
[LVGL] Image RGB zoom anti aliased opa,[LVGL] 107
[LVGL] Image ARGB zoom,118
[LVGL] Image ARGB zoom opa,[LVGL] 120
[LVGL] Image ARGB zoom anti aliased,97
[LVGL] Image ARGB zoom anti aliased opa,[LVGL] 98
[LVGL] Text small,19
[LVGL] Text small opa,[LVGL] 19
[LVGL] Text medium,19
[LVGL] Text medium opa,[LVGL] 19
[LVGL] Text large,19
[LVGL] Text large opa,[LVGL] 19
[LVGL] Text small compressed,18
[LVGL] Text small compressed opa,[LVGL] 18
[LVGL] Text medium compressed,17
[LVGL] Text medium compressed opa,[LVGL] 17
[LVGL] Text large compressed,16
[LVGL] Text large compressed opa,[LVGL] 16
[LVGL] Line,53
[LVGL] Line opa,[LVGL] 54
[LVGL] Arc think,44
[LVGL] Arc think opa,[LVGL] 43
[LVGL] Arc thick,44
[LVGL] Arc thick opa,[LVGL] 43
[LVGL] Substr. rectangle,36
[LVGL] Substr. rectangle opa,[LVGL] 36
[LVGL] Substr. border,37
[LVGL] Substr. border opa,[LVGL] 37
[LVGL] Substr. shadow,19
[LVGL] Substr. shadow opa,[LVGL] 19
[LVGL] Substr. image,125
[LVGL] Substr. image opa,[LVGL] 126
[LVGL] Substr. line,33
[LVGL] Substr. line opa,[LVGL] 33
[LVGL] Substr. arc,42
[LVGL] Substr. arc opa,[LVGL] 42
[LVGL] Substr. text,15
[LVGL] Substr. text opa,[LVGL] 15三、D0内核调试挖坑 测试D0内核花费了3天时间也没搞定总是进入初始化以后直接就卡屏卡死了。因为在假期没带DEBUG工具只能随便打点测试了一下 1.SPI1无法启用
按照官方SDK进行测试发现根本没有使用SPI1而且在lcd_spi_hard_4_init(lcd_spi_hard_4_init_t *dbi_parra)初始化过程中spi_hd bflb_device_get_by_name(LCD_SPI_HARD_4_NAME);得到的是spi0。。。
int lcd_spi_hard_4_init(lcd_spi_hard_4_init_t *dbi_parra)
{/* spi */struct bflb_spi_config_s spi_cfg {.freq dbi_parra-clock_freq,.role SPI_ROLE_MASTER,.mode SPI_MODE3,.data_width SPI_DATA_WIDTH_8BIT,.bit_order SPI_BIT_MSB,.byte_order SPI_BYTE_LSB,.tx_fifo_threshold 0,.rx_fifo_threshold 0,};/* dma cfg */struct bflb_dma_channel_config_s dma_spi_tx_cfg {.direction DMA_MEMORY_TO_PERIPH,.src_req DMA_REQUEST_NONE,.dst_req DMA_REQUEST_SPI0_TX,.src_addr_inc DMA_ADDR_INCREMENT_ENABLE,.dst_addr_inc DMA_ADDR_INCREMENT_DISABLE,.src_burst_count DMA_BURST_INCR4,.dst_burst_count DMA_BURST_INCR4,.src_width DMA_DATA_WIDTH_16BIT,.dst_width DMA_DATA_WIDTH_16BIT,};pixel_format dbi_parra-pixel_format;#if (SPI_FIFO_WIDTH_VARIABLE_SUPPORT)/* SPI support burst*4 */spi_cfg.tx_fifo_threshold (2 * 4 - 1);spi_cfg.rx_fifo_threshold (2 * 4 - 1);spi_cfg.byte_order SPI_BYTE_MSB;
#elifspi_cfg.tx_fifo_threshold 4 - 1;spi_cfg.rx_fifo_threshold 4 - 1;
#endifspi_hd bflb_device_get_by_name(LCD_SPI_HARD_4_NAME);/* CS and DC pin init */gpio bflb_device_get_by_name(gpio);bflb_gpio_init(gpio, LCD_SPI_HARD_4_PIN_CS, GPIO_OUTPUT | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_1);bflb_gpio_init(gpio, LCD_SPI_HARD_4_PIN_DC, GPIO_OUTPUT | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_1);LCD_SPI_HARD_4_CS_HIGH;LCD_SPI_HARD_4_DC_HIGH;if (spi_hd-idx 0) {bflb_gpio_init(gpio, LCD_SPI_HARD_4_PIN_CLK, GPIO_FUNC_SPI0 | GPIO_ALTERNATE | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_2);bflb_gpio_init(gpio, LCD_SPI_HARD_4_PIN_DAT, GPIO_FUNC_SPI0 | GPIO_ALTERNATE | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_2);}
#if defined(GPIO_FUNC_SPI1)else if (spi_hd-idx 1) {bflb_gpio_init(gpio, LCD_SPI_HARD_4_PIN_CLK, GPIO_FUNC_SPI1 | GPIO_ALTERNATE | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_2);bflb_gpio_init(gpio, LCD_SPI_HARD_4_PIN_DAT, GPIO_FUNC_SPI1 | GPIO_ALTERNATE | GPIO_PULLUP | GPIO_SMT_EN | GPIO_DRV_2);}#endif/* spi init */bflb_spi_init(spi_hd, spi_cfg);/* spi enabled continuous mode */// bflb_spi_feature_control(spi_hd, SPI_CMD_SET_CS_INTERVAL, true);if (pixel_format LCD_SPI_LCD_PIXEL_FORMAT_RGB565) {dma_spi_tx_cfg.src_width DMA_DATA_WIDTH_16BIT;dma_spi_tx_cfg.dst_width DMA_DATA_WIDTH_16BIT;}if (spi_hd-idx 0) {dma_spi_tx_cfg.dst_req DMA_REQUEST_SPI0_TX;spi_tx_fifo_address DMA_ADDR_SPI0_TDR;}
#if defined(DMA_REQUEST_SPI1_TX)else if (spi_hd-idx 1) {dma_spi_tx_cfg.dst_req DMA_REQUEST_SPI1_TX;spi_tx_fifo_address DMA_ADDR_SPI1_TDR;}
#endif/* dma init */spi_dma_hd bflb_device_get_by_name(LCD_SPI_HARD_4_DMA_NAME);bflb_dma_channel_init(spi_dma_hd, dma_spi_tx_cfg);/* dma int cfg */bflb_dma_channel_irq_attach(spi_dma_hd, spi_dma_callback, NULL);return 0;
}
按照device_table.c文件中竟然没有规定spi1..........也没有规定DMA2的对应0-7个通道但是却规定了DMA0的0-7个通道官方datasheet中DMA0和DMA1只有一个通道。8个通道的寄存器基地址都是DMA0_BASE( #define DMA0_BASE ((uint32_t)0x2000c000)),在else这个分支里面竟然中断号都是0XFF,真是被这SDK搞懵了。看这样子好像官方并不想让使用spi1来使用这个问题等待后续解决。
{ .name spi0,.reg_base SPI0_BASE,
#if defined(CPU_M0) || defined(CPU_LP).irq_num BL808_IRQ_SPI0,
#else.irq_num 0xff,
#endif.idx 0,.dev_type BFLB_DEVICE_TYPE_SPI,.user_data NULL
},{ .name dma0_ch0,.reg_base DMA0_BASE 1 * DMA_CHANNEL_OFFSET,
#if defined(CPU_M0) || defined(CPU_LP).irq_num BL808_IRQ_DMA0_ALL,
#else.irq_num 0xff,
#endif.idx 0,.sub_idx 0,.dev_type BFLB_DEVICE_TYPE_DMA,.user_data NULL
}, 四、引申出来的RAM分配问题 下面贴一下官方的SDK中定义的分配方案看的我脑袋大有点看不懂能不能这样使用或者是这样使用会不会出现冲突。(0x62020000的意思是使用chache访问和直接访问0x2202000是一个意思但是nocache_ram_memory区域必须使用0x22034000直接访问不能使用cache访问。 1.M0的ram_memory区域ram_memory (!rx) : ORIGIN 0x6202A000, LENGTH 24K也就是0x2202A000-0x2203000,但是LP内核的itcm_memory (rx) : ORIGIN 0x2202C000, LENGTH 16K也就是0x2202C000-0x2203000; 2.LP内核区域的dtcm_memory (rx) : ORIGIN 0x22030000, LENGTH 16K和M0内核的ram_wifi (wxa) : ORIGIN 0x22030000, LENGTH 160K - __EM_SIZE冲突虽然LP内核内部没有cache功能但是也好奇怪为什么还会划分idata和ddata这两个区域。 3.我自己曾经尝试过按照不冲突的RAM地址升序顺序和严格按照手册所写的itcm和dtcm大小进行内存划分没有发现明显区别coremark和lvgl都没有任何提升。看看后续如何理解这个问题和解决问题。
LP-MEMORY
{fw_header_memory (rx) : ORIGIN 0x58020000 - 0x1000, LENGTH 4Kxip_memory (rx) : ORIGIN 0x58020000, LENGTH 1Mitcm_memory (rx) : ORIGIN 0x2202C000, LENGTH 16Kdtcm_memory (rx) : ORIGIN 0x22030000, LENGTH 16Knocache_ram_memory (!rx) : ORIGIN 0x22030000, LENGTH 0Kram_memory (!rx) : ORIGIN 0x22034000, LENGTH 16Kxram_memory (!rx) : ORIGIN 0x40000000, LENGTH 16K
}M0-MEMORY
{fw_header_memory (rx) : ORIGIN 0x58000000 - 0x1000, LENGTH 4Kxip_memory (rx) : ORIGIN 0x58000000, LENGTH 32Mram_psram (wxa) : ORIGIN 0x50000000, LENGTH 64Mitcm_memory (rx) : ORIGIN 0x62020000, LENGTH 20Kdtcm_memory (rx) : ORIGIN 0x62025000, LENGTH 4Knocache_ram_memory (!rx) : ORIGIN 0x22026000, LENGTH 16Kram_memory (!rx) : ORIGIN 0x6202A000, LENGTH 24Kram_wifi (wxa) : ORIGIN 0x22030000, LENGTH 160K - __EM_SIZExram_memory (!rx) : ORIGIN 0x40000000, LENGTH 16K
}D0-MEMORY
{fw_header_memory (rx) : ORIGIN 0x58000000 - 0x1000, LENGTH 4Kxip_memory (rx) : ORIGIN 0x58000000, LENGTH 32Mitcm_memory (rx) : ORIGIN 0x3eff0000, LENGTH 28Kdtcm_memory (rx) : ORIGIN 0x3eff7000, LENGTH 4Knocache_ram_memory (!rx) : ORIGIN 0x3eff8000, LENGTH 0Kram_memory (!rx) : ORIGIN 0x3eff8000, LENGTH 32K 32Kxram_memory (!rx) : ORIGIN 0x40004000, LENGTH 16K
} 还是希望官方能够多给点文档看啊linux下的M1S_DOCK_SDK好像就有很多正常的功能寄存器还有库文件我看文件抬头都是博流写的真的是无语了。 后续还是在Linux下使用M1S_DOCK_SDK开发吧官方的库我实在是搞不懂。浪费精力。
